Square Footage Calculator

This square footage calculator finds the area of rooms, floors, walls, and simple shapes in square feet and square metres.

It is a useful starting point for flooring, painting, tiling, renovation planning, and estimating material coverage.

A room that is 15 ft long and 12 ft wide has 180 square feet of floor area. The same measurement can be converted to about 16.7 square metres.

For wall area, multiply wall width by wall height. A 12 ft wall that is 8 ft high has 96 square feet before subtracting doors or windows.

Measure at the longest practical points and split irregular spaces into smaller rectangles or triangles. Add the smaller areas together for a better estimate.

Round up slightly for material planning. Small measurement errors can matter when buying flooring, tile, paint, or other coverage-based products.

Start with a simple sketch of the area, noting doors, cuts, slopes, and any sections that are not perfectly rectangular. Split awkward shapes into smaller rectangles or triangles, calculate each piece, then add the totals.

Write down whether you are measuring inside or outside dimensions and stick to one method throughout. Mixing methods is a common reason why two people produce different material totals from the same room.

Use the calculator for the core quantity first, then list the extras separately: primer, adhesive, grout, edging, membrane, delivery, and disposal. Those line items often decide whether the project stays inside budget.

When the job connects to other trades, compare outputs with square footage, paint, flooring so flooring, paint, tile, and area figures stay consistent across the plan.

Round up to whole packs, bags, boxes, or delivery units rather than rounding down. Suppliers rarely sell partial packs, and running short mid-job can mean a colour, batch, or stock mismatch.

Ask about minimum delivery quantities, pallet fees, and whether waste allowance should rise for diagonal layouts, fragile products, or uneven substrates before you place the order.

Keep a photo of the label, batch code, and coverage details when buying finish materials. That makes future repairs much easier if a tile, plank, or paint line is discontinued.

If a contractor is quoting the job, use your quantity as a sense-check on their allowance. Large differences are a useful prompt to ask what waste rate, unit price, or preparation work they assumed.

Do not forget vertical surfaces when the material covers walls as well as floors. Wainscoting, splashbacks, and feature walls can add meaningful area even in a small room.

Thickness, depth, and coverage rate matter as much as length and width. A small change in slab depth, gravel depth, or paint spread rate can change the order size significantly.

Avoid assuming the space is perfectly square. Older rooms, patios, and roofs often taper slightly; measuring at more than one point reduces the risk of a costly under-order.

Treat the result as a planning estimate rather than a structural specification. For load-bearing work, drainage, or code-sensitive projects, confirm requirements with a qualified professional.

Bring your sketch, measurements, and calculator output to the supplier or contractor so the conversation starts with quantities instead of vague room descriptions.

Ask whether the product coverage rate on the label matches the surface you are covering. Porous, textured, or previously coated surfaces can reduce effective coverage.

Compare at least two sourcing options when timing allows. Delivery cost, pack size, and return policy can change the cheapest-looking material into a more expensive overall order.

Keep the estimate after the job finishes. It becomes a useful baseline for future repairs, extensions, or insurance discussions if you record what was actually used.

This square footage calculator measures simple rectangle, triangle, and circle areas in square feet and converts the result to square metres.

It fits square footage calculator, room square footage, wall square footage, square feet calculator, floor area calculator, and area in square metres searches.

For multi-room totals, alcoves, closets, exclusions, and waste allowance, use the multi-room area calculator. This square-footage page does not calculate full material orders, property valuation, legal floor area, stair area, or official listing measurements.

Use the calculator result as the material starting point, then check the parts of the project that affect the real order: access, delivery minimums, product pack sizes, batch matching, surface preparation, waste, and whether the work area is as square and level as it looks.

For a quick budget, multiply the adjusted quantity by the supplier price and add delivery, tools, fixings, disposal, and any preparation materials. Those extras can be the difference between a tidy estimate and a project that quietly runs over budget.

Homeowners can use it before visiting a supplier, landlords can use it when comparing repair quotes, and contractors can use it for quick early checks before producing a formal estimate. It is also useful when comparing two project options that use different materials.

The result should make conversations more specific. Instead of asking for "enough material for a room" or "a load for the driveway," you can discuss approximate quantities, waste allowance, delivery units, and where a professional measurement is still needed.

Measure consistently and avoid mixing inside dimensions, outside dimensions, and rounded estimates in the same calculation. Even a small measuring error can become expensive across a whole room, wall, driveway, or project area.

Do not round material quantities down. Allow for cuts, waste, breakage, overlaps, access constraints, and supplier pack sizes before ordering, especially when matching batches or finishes matters.